|
MAINTENANCE
|
|
RESTRING
Deoxidize frets. Clean, wax and oil fretboard. Clean guitar restring and tune to pitch.
|
|
|
MINIMUM BENCH CHARGE Does not apply to restring
|
|
|
SETUP Adjust and tighten all hardware.
Deoxidize frets, wax and oil fretboard.
Slot and lubricate string nut. Adjust
truss rod. Check bracing (if applicable).
Set action and intonation. Clean and
adjust all electronics.
|
|
|
DRESS & RECROWN FRETS
Level frets to remove all wear or
uneven areas. Recrown/reshape frets.
Sand and buff.
|
|
|
Add setup for
|
|
|
|
|
|
TEMPERED TUNING SYSTEM
|
|
BUZZ FEITEN TUNING SYSTEM.
|
|
|
EARVANA TEMPERED TUNING SYSTEM
|
|
|
|
|
|
REPAIR
|
|
REFRET Remove distressed frets. Resurface
fingerboard. Seat fret size of your
choice, dress and recrown.
|
|
|
Without binding
|
|
|
With binding
|
|
|
Add a setup for
|
|
|
ELECTRONIC MALFUNCTION
Evaluate and rewire as needed. Price
varies depending on issue..
|
|
|
REWIND PICK-UP COILS Strip and rewind bobbin. Reassemble
coil. and wax. Reinstall pick-up and
wire.
|
|
|
BROKEN HEADSTOCK Caul, clamp, and epoxy/glue into
place. Clean up joint and buff area.
|
|
|
CRACKED BODY Realign break or separation. Glue and
cleat as needed. Clean up and buff
joint.
|
|
|
LOOSE OR BROKEN BRACE
Realign, glue and clamp as needed
|
|
|
|
|
|
MODIFICATION
|
|
FABRICATE STRING NUT
Shape, space, and slot bone, graphite
or brass. Trim and buff.
|
|
|
Bone or graphite
|
|
|
Brass
|
|
|
INSTALL HARDWARE
Locate and install pegs, bridge,
neck, etc.
|
|
|
INSTALL PICK-UP
Install and wire up to 3 pickups
(phase if necessary) Reassemble.
|
|
|
REWIRE
Strip down if necessary and rewire all
electronic components.
|
|
|
Passive
|
|
|
Active
|
|
|
Custom wiring available
|
|
|
CUSTOM MILLING
Mill cavities for electronics or hardware.
Reshape or contour instrument as
discussed.
|
|
|
FABRICATION OF NECKS,
BODIES & PICKGUARDS
Custom build to clients specifications.
|
prices vary please inquire
|